棒状钡铁氧体的反相微乳法制备

A rodlike barium ferrite precursor with an average size of 0.72～19.6 μm and aspect ratio of 2.6～8.3 has been successfully prepared in an inverse microemulsion consisting of isooctane, cetanyl trimethyl ammonium bromide (CTAB), n-C₄H₉OH and water with ammonia and ammonium oxalate as precipitants. On sintering at 780(C, the rodlike precursor particles could be transformed into rodlike particles of barium ferrite(BaFe₁₂O₁₉) with the average size and aspect ratio of 0.69～18.2 μm and 2.3～5.8, respectively. The effect of volume ratio of aqueous phase to oleic phase, the starting concentrations of metal ions and the starting concentration ratios of metal ions to precipitants were investigated.     

裂解色谱法研究PMR型聚酰亚胺前体的反应过程

用裂解气相色谱法研究ＰＭＲ型聚酰亚胺前体在反应中的化学变化过程，以裂解产物醇和环戊二烯的生成率表示酰胺化或酰亚胺化及交联的程度，结果表明，酰胺化或酰亚胺化在５０℃以下不发生，在１８０～２２０℃完成，降冰片烯端基在１５０℃以下不发生交联反应，在２８０℃，１０～１８小时可完成交联反应。     

Mass spectrometric analysis of low molecular mass polyesters by laser desorption/ionization on porous silicon

A low molecular mass polyester was analyzed by desorption/ionization on porous silicon (DIOS) mass spectrometry. The results were compared with those of matrix-assisted laser desorption ionization (MALDI) mass spectrometry using matrixes of alpha-cyano-4-hydroxycinnamic acid (CHCA) and 10,15,20-tetrakis(pentafluorophenyl)porphyrin (F20TPP). The CHCA matrix was not suitable for characterization of low molecular mass components of the polyester because the matrix-related ions interfered with the component ions. On the other hand, the F20TPP matrix showed no interference because no matrix-related ions appeared below m/z 822. However, the solvent selection for determining optimal conditions of sample preparation was limited, because F20TPP does not dissolve readily in any of the available organic solvents. In the DIOS spectra, the polymer ions were observed at high sensitivity without a contaminating ion. No matrix is needed for DIOS spectra of low molecular mass polyesters, facilitating sample preparation and selectivity of a precursor ion in post-source decay measurements.     

A Facile Synthesis of Ethyl 2,4-Dimethoxy-6-perfluoroalkyl-benzoates via Acyclic Precursors

Introduction Polysubstituted arenes are important intermediates in synthetic medicines and dyestuffs, and the fluorinated analogues are more attractive as a result of their lipo-philicity and the increment of activity.1,2 Therefore, to study the convenient and efficient synthesis of polysub-stituted arenes is valuable in organic synthetic method-ology. We have designed a simple synthesis of fluori-nated polysubstituted arenes through the intramolecular Wittig reaction of a new phosphorous ylid…     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Siloxane-Based Nanobuilding Blocks by Reaction Between Silanediol and Trifunctional Silicon Alkoxides

The preparation of nanostructured organic-inorganic materials by assembling of nanobuilding blocks allows controlling the extent of phase interaction, which in its turn governs structure-properties relationships. We present here the synthesis of siloxane-based nanobuilding blocks prepared by reacting diphenylsilanediol with vinyltriethoxysilane and triethoxysilane. The reaction products were obtained by non-hydrolytic condensation between silanediol and ethoxide groups in inert atmosphere, in the presence of pyridine, triethylamine or butyl lithium. Different synthetic conditions were examined by means of ATR-FTIR and NMR spectroscopies, showing the formation of siloxane bonds. In the case of triethoxysilane the reaction carried out in the presence of pyridine leads to Si–H bond preservation in the final product. Air stable products with improved Si–O–Si hydrolytic stability can be obtained by removal of the base after the reaction completion. The condensation products can be described as a mixture of siloxane rings involving difunctional and trifunctional silicon units.     

Debye screening for two-dimensional Coulomb systems at high temperatures

The grand canonical ensemble of a two-dimensional Coulomb system with±1 charges is proved to have screening phenomena in its high-temperature region. The Coulomb potential in a finite region is assumed to be (–)^–1, where is the Laplacian with zero boundary conditions on. The hard-core condition is not assumed. The model is set up by separating (–)^–1 into a shortrange part and a long-range part depending on a parameter. The self-energies are subtracted only for the short-range part and therefore a choice of is a choice of subtraction of self-energies. The method of proof is in general the same as that of Brydges-Federbush Debye screening, except that here a modification for the short-range part of the potentials is needed.     

Synthesis of Inorganic Compounds (Metal, Oxide and Hydroxide) in Polyol Medium: A Versatile Route Related to the Sol-Gel Process

A new route for the preparation of powdery metal, oxide and hydroxide materials is presented as a chimie douce alternative to the sol-gel method. It consists in the reduction or the hydrolysis of a metal salt dissolved and heated in a polyol medium. It appears through zinc and cobalt examples that the use of acetate precursors contrarily to chloride or sulfate ones leads to the precipitation of a solid (metal, oxide, hydroxide) whose nature depends on two main factors: the hydrolysis ratio, defined by the water to metal molar ratio, and the reaction temperature. As in the sol-gel method, acetate leads to the formation of intermediate alkoxyacetate complex. The absence of water favors metal formation while its presence favors oxide or hydroxyacetate formation.     

Silica-Based and Transition Metal-Based Inorganic-Organic Hybrid Materials—A Comparison

Organically substituted metal alkoxides can be prepared by reaction of the parent alkoxides with complexing organic compounds. The chemical and structural consequences of such substitutions are discussed in this article. Examples are given showing how functional organic moieties, such as polymerizable groups, can be incorporated into sol-gel materials via the complexing ligands. Major structural differences between silica-based and metal-based hybrid materials originate from the different charge/coordination number ratios of silicon and most metals. This results in a high tendency for the molecular building blocks to aggregate. In many cases, metal oxide clusters are formed which are capped by the organic ligands. Such surface-modified clusters are themselves very valuable condensed matter units for materials syntheses.     

介孔铁铝/蒙脱土复合材料：解离柱撑制备、结构及催化羟基化性能

利用极稀悬浮液中蒙脱土的解离作用并结合柱化技术过程，制备了介孔结构的铝铁/蒙脱土复合材料(Fe-Al/mmt)；并采用粉末X射线衍射、氮等温吸脱附、傅立叶红外光谱、紫外可见光漫反射光谱及苯酚催化羟基化反应表征了其结构和性能。结果显示，铁铝聚合前驱液中铁/铝比影响复合材料中蒙脱土的解离程度，且仅当低铁/铝比时(即Fe/(Fe+Al)物质的量的比介于0.05～0.3)，嵌入解离的蒙脱土片层间的混合铁铝物种呈现能耐温350 ℃的热稳定性；氮等温吸脱附分析反映出这种解离的蒙脱土堆积结构呈现介孔特征，孔径分布窄，介于2.0～2.3 nm；红外分析表明材料表面具有L酸和B酸位，并且L酸位量与嵌入解离的蒙脱土结构中的混合铁铝物种相关；由于结构中混合铁铝物种的存在及相应的Si-O → Fe、Al-O → Fe间的电子跃迁，Fe-Al/mmt材料在紫外区呈现宽泛的能量吸收特征。这些结果说明，由于混合铁铝物种嵌入于解离的蒙脱土片层堆积结构中，形成了“卡片屋”式介孔结构。实验条件下，Fe/(Fe+Al)物质的量的比为0.3的Fe-Al/mmt呈现较佳的催化羟基化性能，苯酚转化率为36.7%，二酚产物选择性32.3%；并且初步表明铝掺杂后，通过铁铝比和表面酸性的调整，材料的部分选择氧化性能可以得到改善。